Walltransform offers a number of products to the Insulation and Damp-Proofing market, please click on the product links below for more information
Wall-Reform system 1 is a basecoat thermal render that is trowel/spray applied and can be utilised on any substrate. The product is crack resistant, thermally upgrading and is finished with an acrylic/silicone through coloured finish coat, with a 1000 colours available.
It’s a quick and easy way of renewing the appearance of any building, while also thermally upgrading it. With Wall-Reform 1, you don’t lose the character of the building in a way you might, if uniformed insulation boards were to be fitted. The product uniquely overlays sound render or pebbledash ect.
This system is exactly the same as Wall-Reform system 1, but with the addition of a Kingspan phenolic insulation board, for an ultimate insulation system that exceeds new building regulations.
Kingspan Phenolic provides the thinnest insulation board, enabling us to meet and exceed building regulations with a 75mm system, compared to 110mm+ for EPS and PIR board systems. Insulation boards are fitted, joints are sealed, and the Wall-Reform insulating render is applied onto them (20mm), followed by the finish coat of choice.
This system has a benefit that no other system can match. Applying the Wall-Reform insulated render directly onto the insulation boards, does away with all cold bridging, because an insulant (Wall-reform) is being applied onto another insulant (Insulation Board). A lot of systems on the market fail in regards to heat being lost in the gaps of the insulation board.
The new thermal and acoustic wall lining made from recycled polyurethane.
Warm-A-Wall is a new form of insulation on a roll. It is applied to the wall like wallpaper then plaster skim finished to give it a permanent finish.
It can be used on any external wall to increase the insulation value – even if cavity wall insulation has already been fitted!