Damp Proofing

Introducing the biggest breakthrough to the Damp-Proofing market, WallReform Remedial Damp-Proofing Plaster.

The product resolves issues with condensation and mould associated problems, as a result of the product application raising the temperature of the wall construction, combating condensation and cold bridging. WallReform is comparable with traditional lime based mortars, with the added thermal upgrade and no shrinkage.

WallReform thermally out performs any other plaster available on the damp proofing market and has many advantages over its competitors in the market place; some of the advantages are listed below.

WallReform advantages over the current use of sand and cement

Completely guarantees against damp, condensation and salts, after a DPC has been inserted, and the source of damp has been resolved
Thermally upgrades any wall (20 times more thermal value compared with sand and cement) and is totally crack resistant.
List ItemMixing and application is more simplified than using sand and cement. Wallreform covers3sqm per bag, with one minute mixing time.
No unsightly mould growth or coldness affecting anywhere the product is applied.
Quality control, all bags are made to the exact quantities needed, with only water needing to be added.
Lime based, and is fast becoming the go to product for the National Heritage, architects and the renovation of old buildings.
Wallreform thermally upgrades, and can be used on any wall, internally or externally not just for remedial use.
Build out thickness up to 50mm in just one coat. Dubbing out cost are done away with. No need for multiple basecoat applications.

APPLICATION: SUITABLE PRODUCTS

WARM-A-WALL

APPLICATION: INTERNAL THERMAL PLASTER | REMEDIAL DAMP-PROOFING PLASTER

The new thermal and acoustic wall lining made from recycled polyurethane.

Warm-A-Wall is a new form of insulation on a roll. It is applied to the wall like wallpaper then plaster skim finished to give it a permanent finish.

It can be used on any external wall to increase the insulation value – even if cavity wall insulation has already been fitted!

WALL REFORM 1

APPLICATION: EXTERNAL RENDER | INTERNAL PLASTER | DAMP-PROOFING PLASTER

Wall-Reform system 1 is a basecoat thermal render that is trowel/spray applied and can be utilised on any substrate. The product is crack resistant, thermally upgrading and is finished with an acrylic/silicone through coloured finish coat, with a 1000 colours available.

It’s a quick and easy way of renewing the appearance of any building, while also thermally upgrading it. With Wall-Reform 1, you don’t lose the character of the building in a way you might, if uniformed insulation boards were to be fitted. The product uniquely overlays sound render or pebbledash ect.

DAMP PROOFING

APPLICATION: SUITABLE PRODUCTS

WARM-A-WALL

APPLICATION: INTERNAL THERMAL PLASTER | REMEDIAL DAMP-PROOFING PLASTER

WALL REFORM 1

APPLICATION: EXTERNAL RENDER | INTERNAL PLASTER | DAMP-PROOFING PLASTER

We provide a full 25 Year guarantee certificate with each and every installation or supply of all our products.

Visit Us

Useful links

Social Links